Search:
Advanced Search
Products Configured Systems Engineering Services Support Contact About Core RFQ

TM915GVP2

Intel® Pentium® 4 mATX Long Life Cycle Motherboard

SPECIFICATION

PROCESSOR (Socket 775-based Intel®)
•   Intel® Pentium® 4 Processor with
    Hyper-Threading Technology
    –   800MHz/533MHz system data bus
•   Intel® Celeron® D Processor
    –   533MHz system data bus

CHIPSET
•   Intel® 915GV chipset
    –   Intel® 915GV Graphics Memory Controller Hub (GMCH)
    –   Intel® 82801FB I/O Controller Hub (ICH6)

SYSTEM MEMORY
•   Two 184-pin DDR SDRAM DIMM sockets
•   Supports dual channel (128-bit wide) memory interface
•   Unbuffered PC3200 (DDR400), or PC2700 (DDR333)
    DDR SDRAM DIMM
•   Supports maximum of 4GB system memory using 256Mbit,
    512Mbit or 1Gbit technology for x8 and x16 devices,
    non-ECC memory

BIOS
•   Award BIOS
•   4Mbit flash memory

ENERGY EFFICIENT DESIGN
•   Supports ACPI specification and OS Directed
    Power Management
•   Supports ACPI STR (Suspend to RAM) function
•   Wake-On-Events include:
    –   Wake-On-PS/2 Keyboard/Mouse
    –   Wake-On-USB Keyboard/Mouse
    –   Wake-On-LAN
    –   Wake-On-Ring
    –   RTC timer to power-on the system
•   System power management supported
•   CPU stopped clock control
•   Microsoft®/Intel® APM 1.2 compliant
•   Soft Power supported - ACPI v1.0a specification
•   AC power failure recovery

DAMAGE FREE INTELLIGENCE
•   Monitors CPU/system temperature and overheat alarm
•   Monitors VBAT(V)/3.3V/V5SB/V3SB/5V/12V/CPU(V)
    voltages and failure alarm
•   Monitors CPU/chassis fan speed and failure alarm
•   Read back capability that displays temperature,
    voltage, and fan speed

ONBOARD GRAPHICS FEATURES
•   Graphics memory
–   Shares 1MB/8MB of the system memory in DOS mode
–   Uses Dynamic Video Memory Technology (DVMT)
    in Windows mode
•   Graphics controller
–   Core frequency of 333MHz
–   400MHz integrated 24-bit RAMDAC
–   Analog display up to 2048x1536 @ 85Hz refresh
–   High quality 3D setup and render engine - Discrete,
    Triangles, Strips and fans
–   Hardware Pixel Shader 2.0
–   Supports D3D and OGL pixelization rules
–   Per pixel perspective corrected texture mapping
–   533 MegaTexel/sec performance, 266 Megapixels/sec
    fill rate up to two bilinear textures
•   2D graphics features
–   Optimized 256-bit BLT engine
–   32-bit alpha blended cursor
–   Programmable 3-color transparent cursor
•   3D graphics features
–   Supports maximum 3D resolution: 1600x1200x32@ 85Hz
–   Flat and Gouraud shading
–   16-bit and 24-bit Z-buffering and 8-bit Stencil buffering
–   Vertex and programmable pixel fogging and
    atmospheric effects
–   Supports Double and triple render buffer
•   Software drivers
–   Windows® 2000/XP

SPECIFICATION (CONT.)

ONBOARD AUDIO FEATURES
•   Realtek ALC655
•   16-bit stereo full-duplex codec with independent variable
    sampling rate
•   High quality differential CD input
•   True stereo line level outputs
•   S/PDIF-out interface
•   5.1-channel audio output

ONBOARD LAN FEATURES
•   RTL8110SB Gigabit ethernet controller
•   Supports 10Mbps, 100Mbps, and 1Gbps data transmission
•   IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps)
    compliant

SERIAL ATA INTERFACE
•   Supports four SATA (Serial ATA) interfaces which are
    compliant with SATA 1.0 specification (1.5Gbps interface)

IDE INTERFACE
•   Supports up to UltraDMA 100Mbps hard drives
•   PIO Mode 4 Enhanced IDE (data transfer rate
    up to 14MB/sec.)

IEEE 1394 INTERFACE
•   VIA VT6307
•   Supports two 100/200/400 Mb/sec ports

REAR PANEL I/O PORTS
•   1 mini-DIN-6 PS/2 mouse port
•   1 mini-DIN-6 PS/2 keyboard port
•   1 DB-25 parallel port
•   1 DB-9 serial port
•   1 DB-15 VGA port
•   1 RJ45 LAN port
•   1 IEEE 1394 port
•   4 USB 2.0/1.1 ports
•   Line-out, line-in and mic-in

I/O CONNECTORS
•   2 connectors for 4 additional external USB 2.0/1.1 ports
•   1 connector for external COM 2
•   1 connector for 1 external IEEE 1394 port
•   1 front audio connector for line-out and mic-in jacks
•   1 CD-in internal audio connector
•   1 S/PDIF-in/out connector
•   1 connector for IrDA interface
•   1 40-pin IDE connector
•   1 floppy connector
•   1 24-pin ATX power connector
•   1 4-pin 12V power connector
•   1 front panel connector
•   2 fan connectors

EXPANSION SLOTS
•   1 PCI Express x16 slot (supports ADD2 card only)
•   1 PCI Express x1 slot
•   2 PCI slots

COMPATIBILITY
•   PCI 2.2 and AC ´97 compliant
 
CIRCUIT BOARD (PCB)
•   4 layers, microATX form factor
•   24.4 cm (9.6") x 24.4 cm (9.6")


Phone (858) 391-1006 Fax (858) 391-0109
© Copyright 2006-2008 Core Systems